In many ways, smart trainers themselves have largely flat-lined in terms of new features. Sure, we’ll continue to see new models with relatively minor tweaks, but much of the focus for the indoor smart trainer world has been on accessories lately. And that’ll likely continue for the foreseeable future. One such category is motion accessories, commonly called rocker plates. Though, not all rocker plates are created equally, and they’ve got vast differences in what type of motion, how much motion, and the direction of motion.

And thus brings us to the Gymrail Momentum X1 which is by far one of the craziest rocker contraptions I’ve seen make it to production. Unlike most rocker plates, this is a split-component design (kinda like the Inside Ride E-Flex system). This means that you’ve got one portion holding up your front fork doing its thing, while another holds up your entire trainer and remainder of the bike frame.

Between these two components, you and your bike will tilt side to side while concurrently moving forward and backwards. Your handlebars also rotate slightly (which is what enables rotation elsewhere in the bike). However, the kicker here is that, unlike most rocker systems, the rear/trainer portion of your bike also moves laterally side to side, thus accenting movement (both steady-state and sprint). And that combined with the rotational portion allows the whole thing to kinda ‘snake’ along.

Note that Gymrail sent over a Momentum X1 earlier this year to try out for a few months. Once I’m done with this review, it’ll get shipped back to them like normal. Just the way I roll. If you find this review useful, you can use the links at the bottom, or consider becoming a DCR Supporter which makes the site ad-free, while also getting access to a semi-weekly video series behind the scenes of the DCR Cave. And of course, it makes you awesome.

With that, let’s get into it.

The Momentum X1 comes in two boxes. The flat box is just the flat plate as you’ll see in a second, whereas the bigger box is a collection of other parts including the front portion as well as rollers/pieces for the rear portion. Here are all the parts laid out:

Essentially, there are a few major part groupings here:

A) The rear board + skateboard that goes under it (including screws) B) The front assembly, including the fork stand C) The straps that hold your trainer on the rear board/assembly D) The various axle adapters for your specific bike

You can see the straps and adapters here:

First up is taking a screwdriver out. Preferably a good one, and preferably one that aspires to be a drill – since that’s effectively what it’ll be doing in a moment.

Next, you’re going to place the roller system on the plate. You’ll notice I’ve pointed out with my fingers the screw holes on the skateboard. This is notable because there are no holes on the board itself. You’ll be creating those holes via the screwdriver by rotating the included sharp screws into the wood.

The only then downside to that, is that they very slightly start to poke through the board. I mean, it’s barely visible here, but would be my only minor complaint here. Once you stick a trainer on them, you’d likely never notice them.

Now, with the wheels on the rear plate, it’s time to turn our attention to the front plate:

Despite looking like a folded-up spider that’s about to attack you, it’s actually pretty straightforward. You just swing the very sturdy feet out from under it, and then lock them in place with the screws. If there’s anything you should come away with as a takeaway here is that this front thing is built like a tank. It’s the CompuTrainer of rocker plates systems.

You’ll then rotate the feet out to ideally the same height, else…well, nobody wants a tipsy platform. I mean, I guess unless you were literally building a rocker platform. But this part of the rocker system shouldn’t be tipsy. So spend 5 seconds to get the heights right.

Then you’ll rotate the small pole onto the middle. This stripper pole for gnomes is what holds up your front fork. You can swap out the exact axle adapter you’d need for your specific front fork.

Finally, moving our focus back to the rear, it’s time to get that smart trainer on there. In my case, I went with a Wahoo KICKR CORE, simply because it was the closest trainer to me at the time. I used a small level to find the right placement to ensure the rear plate was level. This is pretty much the norm on all rocker plates.

Then, the X1 has these little plates that you’ll place wherever you see fit. It’s these that allow you to strap your trainer to the board. Most of the other major pre-built rocker plate systems instead have slots in the board that you thread the straps through. But here you affix the included brackets to the board wherever you see fit (using the same screwdrivers + screws technique earlier).

Once all is said and done, it’ll look like this:

It’s super stable, and didn’t go anywhere (nor has it since). For context, my overall install time was 25 minutes, but that’s including taking both video and a gazillion photos. In general, I find that doing the extra photos/videos usually doubles my install times. So I’m guessing this would take 10-15 minutes for a normal person.

Now, from a compatibility standpoint, the Momentum X1 is compatible with basically every smart trainer, according to their FAQ page. Though, they do note that you shouldn’t put rollers on there. Which seems like a self-explanatory thing, as if to say “Please don’t skateboard on the roof of a moving vehicle”, but hey, there are plenty of stupid people in the world. On the bright side, if you do have an unlisted smart trainer that’s larger than the back plate size (L 700mm x W 760mm), they can apparently sort you out (since it’s basically juts a single board, that you then affix the hardware to after the fact).

So first things first is putting your bike on it. Given I presume you know how to put your bike on your trainer, I’ll assume you can repeat that task with the bike on the same trainer, just now atop a board instead. Similarly, on the front-end, it’s no different than your front wheel, except now just the small pole. Notably, said pole actually tilts left and right as well (you can see it in the video).

Now’s a good time as any to mention the official movement specs:

Fore-Aft Movement: 6cm back, 6cm forward, for a total of 12cm (4.5”) total range Side to Side Tilt: 7.5° left, 7.5° right, for 15° total tiltable range Ride to Side Lateral Movement: 6cm back, 6cm forward, for a total of 12cm (4.5”) total range Rotational Movement (twisting): Up to 7° on both front and rearward pivot points

So, in many ways, this portion of the review is frankly better done just watching the video at the top. After all, this is all about movement, and seeing the movement is so much easier than writing about it.

Nonetheless, let’s step through this from back to front. I will note that mounting the bike atop the trainer atop the wiggle-wiggle platform is a bit tricky at first. Like mounting some other rocker plate creations, you get better at it each time, though there’s always the little voice in the back of your mind that wonders if the DCR Cave Nest Cam will catch an epic (dis)mount failure.

Once on, you’ll start pedaling as normal. Nothing about your trainer changes here. Instead, it’s all about how your bike reacts to your movements and efforts. The first movement angle you’ll have already felt when you mounted the bike is the tilting angle (up to 7.5* each direction). And as you ride, it’s this tiny bit of movement that is arguably the most important one. Even in super stable steady-state riding (such as long medium-intensity ERG mode sessions), you’ll feel that gentle tilting, which in turn forces your butt/body to move slightly around the saddle. It’s that movement (even just a couple of millimeters) that tends to help with longer indoor trainer rides, reducing the fatigue of one spot.

If you give the pedals a bit of a surge in power, you’ll next notice two things. First is that the bike will slide forwards (and then immediately back). This is your momentum carrying you forward, upwards of 6cm each direction from the center point. For lesser sprints this feels nice, such as for just moderate increases of power. When you get to a hard/abrupt sprint, this also feels abrupt, because you’ve only got those 6cm of range to work with before you get pulled back.

As part of this springing forward, the rear of the platform actually moves forward on it’s wheels. Meaning, your skateboard moves. This then brings up the question of how a trainer mat might impact that feeling (since a mat would increase the rolling resistance). I’ve tried it both ways, and while yes, it doesn’t quite feel as responsive on a trainer mat, it’s not bad either. I’m lucky in that I’ve got buttery smooth concrete floors that it loves rolling on, and I can sweat on those all day long without damaging any flooring.

Now, when you did that surge in power, you probably also rotated the handlebars just slightly (or, a lot). That’s because that gnome stripper pole up front holding your fork also rotates. It’s this rotation that keeps the entire movement illusion on-point. Also, it ensures your bike doesn’t break, which is mildly beneficial.

(It’s worthwhile noting that the company is working on an electronic steering enabled variant of this pole (above), that will integrate with platforms that support steering. The plan is to have it as a simple accessory you can buy to swap out the existing pole, and then transmits rotation like the Elite Sterzo Smart or other steering accessories.)

And finally, if you go for an all-out sprint, you’ll notice that the entire thing almost does a little ‘s’ snake behind you, which is basically the combination of the rotational elements on the front and back allowing the platform to somewhat chase you as you sprint forward, sliding left and right based on your power kicking the plate with each pedal stroke. If you spend enough time on YouTube looking up cycling sprint videos, you can actually see this effect there. It’s super tricky to see, because most cyclists are riding on a white line or such to make it obvious. Maybe I’ll have to find a friend and get some footage outdoors.

Which then immediately dovetails into the usual discussions on rocker plates about how when you sprint, the tilt direction is opposite of out on a real-bike (relative to which leg is down). And that’s true, that happens here as well. There’s no gravity to counter-balance here like there is out riding on the real road, since your bike is clamped into a trainer. To me, it doesn’t bother me much. It bothers (or maybe triggers) some people, and that’s fine. But I also don’t bother to try and ‘fix’ my cycling form while riding indoors like some do. Again, I just don’t really see the value in that, partially because I’m not generally doing constant hard sprints when I ride.

Ultimately, where most rocker plates shine isn’t the hard sprints that easily demonstrate the rocker plate movement, but rather the more steady-state riding and light surges that are harder to show on camera, but in terms of feel and fatigue, are the places these type of devices make the biggest difference.

And that’s true here as well. I like the overall movement of the entire platform, mainly for more even-handed riding. At the sprint side, it gets a bit crazy, but the unit they shipped me is with the lesser-tension sprints (they also make one with more tension/stiffness). So, if I wanted to reduce some of that sprint-wiggle, one could go with the higher tension springs instead.

Nonetheless, with the Momentum X1’s multiple directions of movement, it feels far less restrictive than most other rocker plates or motion systems I’ve tried.

Of course, you’re probably looking for some comparative thoughts. First up, it’s worthwhile mentioning the price now – which is steep! It comes in at 1,395€ + VAT. Eeks!

For comparison, the Saris MP1 Platform, is priced at about 1,030€ (real-world EU pricing), which also does side to side tilting and front/back movement, but doesn’t laterally move your bike left/right like the X1 does.

After that, you drop down pretty quickly in price to roughly $300-$600 for various ‘standard’ rocker plates that you can place your entire bike on. Many of these models are literally the exact same unit, just re-branded. Such as RPV1 from KOM Cycling or the JetBlack equivalent or the Wiggle Lifeline Rocker Plate (albeit, a fraction the price these days), and so on. In the same price bucket is the InsideRide E-Flex motion accessory, which works with the Wahoo KICKR/CORE trainers for $449. And at the bottom edge of that price range is the Garmin/Tacx Motion Plates, for just the Tacx NEO trainers, sitting at $299. That though moves forward/back slightly, but takes up virtually zero extra space.

Below that price-wise you’ll find a slate of DIY and semi-DIY rocker solutions, some as simple as tennis balls under a trainer, and others more advanced ball+board solutions.

In many ways, it’s both a simple and confusing market. The challenging is figuring out what you actually want out of it motion-wise. The more motion directions you want, the more you pay. However, whether or not you need or care about those additional motion vectors is a pretty valid question. For many people, simply introducing just a tiny bit of motion (be it tennis balls or the Tacx system) is enough to ‘do the trick’ in terms of tricking your core into unconsciously slightly moving your butt on the saddle, which mimics outdoor riding and typically reduces fatigue on longer indoor trainer rides.

And there’s a vast difference between riding a trainer that doesn’t move at all, and on that moves just a tiny bit.

But that’s all quite different than riding something like the Gymrail Momentum X1 or Saris MP1, which aim to give far greater movement directions and quantities of movement. When you sprint, you briefly move forward, which amplifies that sprint. In the same way that as you ramp-up on a surge, you’ll feel that throughout the bike on the Momentum X1, because it’s going to start swaying a bit, in a nod to what your rear wheel actually does behind you out on the road (you can see it around the 1:20-1:27 marker of this sprint video of Peter Sagan and friends).

Of course, the biggest challenge here is simply the pricing. For me in the Netherlands, if I were to buy this it’d be ~1,700€ all-in. Whereas including VAT, the Saris MP1 motion right now is showing about 1,030€ . That’s a tough bridge to gap. Note that while it’s only available in Europe today, that the company does hope to be in the US market by the end of the year.

There’s no question the Gymrail system is unique. I suppose that was probably obvious the first time they showed it to the world, it didn’t really look – or move – like any other rocker plate system at the time. The next question is: Is that uniqueness a good feeling?

Yes, I think overall it adds good movement to the indoor feeling – and most importantly, it largely feels natural. As noted, there are two different spring versions, one with less tension and one with more tension. I tested the lesser tension one, which means more movement given I’m probably a larger rider. In my case, I was good with that amount of movement, while others might look at the footage and prefer a bit more stability. To each their own.

As with most rocker systems, you’ll still have the inversion issue whereby the sprint lean angle is opposite compared to a regular bike out on the road (since you’re not fighting gravity here, but rather a counterweight system). Practically speaking, most people never notice until someone on the Internet points it out. This then gets to the second piece, which is whether or not to try and ‘correct’ that through changing your riding form. Some prefer to do so, but frankly, I’d prefer not to worry about it. There are many things that are different about indoor riding compared to outdoor riding – and I’m OK with that just being one of them.

In some ways, probably the best part of the Momentum X1 is that it just feels a bit spicy. Meaning, with a regular rocker plate, I know it’s going to basically just tilt side to side, or perhaps, also move on a rail front/back. But with the Momentum X1 having the lateral side to side movement too, and the wheels – you kinda never know exactly how it’s going to react. It kinda reminds me a bit of riding a mountain bike downhill, in that as you briefly take flight over bumps, the exact way your bike lands over the next set of roots/rocks/ground is always a little bit different. This is kinda like that, except still in your garage.

With that – thanks for reading!

Your email address will not be published. Required fields are marked. If you would like a profile picture, simply register at Gravatar, which works here on DCR and across the web.

Subscribe me to the newsletter

I would like to support DCR and enjoy ad-free DC Rainmaker ($20 per year).

 Notify me of followup comments via e-mail.

You can click here to Subscribe without commenting

Do you think we’ll ever see anything like this for the Tacx NEO Bike? They’re even worse for numb-bum as at least with bike-on trainers you get a bit of flex in the bike frame, whereas this is rock solid and you certainly notice it.

I’m not ready to pay £1000 any time soon, but it would be interesting to see if there was a big enough market to make this worth anyone’s effort.

EDIT: I was forgetting that there’s a rocker plate for the KICKR Bike, so maybe.

Yes, there are several makers that offer rocker plates for smart bikes like the Neo. They work as well as those for bike & trainer combos. There are models available around the world from at least a few builders if you are really looking to get one.

Yeah, as Chad said, there are options out there. Ranging from reasonably solid to ‘umm…that seems well beyond sketch’.

To me, that’s sorta the challenge with buying a smart bike right now, the product just isn’t super mature. I think all the pieces are there in theory from different vendors, but nobody really has it nailed yet.

For ride feel, I think the KICKR BIKE is the closest, but of course, it lacks the front screen area (which I know some don’t like, but having ridden Peloton and Technogym bikes now, it’s just such a better way of ensuring a well integrated package).

Then you flip over to the TechnoGym bike, which has the good screen, reasonably good ride feel (but not the sway/elevation of KICKR Bike). And, while not publically announced in any fashion I know of, the most recent models from the last few weeks off the assembly line now even have a very small amount of tilt left and right, using a mini rocker feet built-in, akin to the KICKR AXIS feet, but with a center rotation point. On my to-do list to write-up/share video of.

But even that bike has challenges on the software front. It has Rouvy built-in, and that works rather well. But the Zwift integration isn’t real (it’s just HDMI pass-through), and there’s some other quirks. It’s good, but like everything else, all the options feel like V1 version (cause they are).

And of course, I could basically continue this all the way around one bike after another…

Pretty off topic, but any recommendation of a “dumb” piece similarto the front part of this to use my bike on the trainer without a front wheel mounted?

The closest option I have seen for a fork stand is the one from Kreitler. It has enough support for proper stability. The issue is that it takes up even more space than a wheel, so other than the lack of air pressure maintenance, it’s not really worth the money, IMO. link to kreitler.com

There are a range of DIY options I have seen using those fork mounts meant for transporting bikes in cars and trucks. But you have to build that and make sure it is stable for use.

People are likely better off with a regular wheel and inserting some foam to make a “trainer wheel”. that is what I did to have a no-maintenance option for use with my wheel-off trainers.

Thanks for the information and recommendations! Really appreciate it.

Thanks Ray How would this work using just the front part with the Kurt Kinetic Rock & Roll in the back?

Are you suggesting the R&R on top of the X1 rear section, or a complete replacement of the X1 rear?

On top would be a disaster.

Replacement would work, but would kill the fore-aft motion aspect in the least. You’d also have a notable height difference between the front & rear axles (R&R low). That could be addressed with spacers under the R&R. But I don’t see a benefit unless you were aiming to reduce degrees of freedom of motion from the X1, or add some level of steering via the front with the R&R.

Considering that the front has all those freedoms, but the R&R on a floor only has the lean, it could lead to some odd loading on the frame as compared to the more “floaty” X1 rear. Not a good combo in any way I can see.

I raise you the R&R suggestion with putting the R1 atop the X1. Which, I believe is one step above when I stupidly tried putting the R1 atop the MP1…

Double Stack motion trainer & motion platform = hospital visit 😛

I need more time to share some thoughts that we’ve covered in the FB group when this got introduced, but I really want to thank you for the great coverage and review. Observations and such are all in line with my thoughts and I am happy you are getting these in front of more people to see what’s possible. 😀

I swim, bike and run. Then, I come here and write about my adventures. It’s as simple as that. Most of the time. If you’re new around these parts, here’s the long version of my story.

You'll support the site, and get ad-free DCR! Plus, you'll be more awesome. Click above for all the details. Oh, and you can sign-up for the newsletter here!

Wanna save some cash and support the site? Use Backcountry.com or Competitive Cyclist with either the coupon code DCRAINMAKER for first time users saving 15% on applicable products.

In the UK/EU/Australia/New Zealand? Then hit up Wiggle at the link below!

Alternatively, for everything else on the planet, simply buy your goods from Amazon via the link below and I get a tiny bit back as an Amazon Associate. No cost to you, easy as pie!

Want to compare the features of each product, down to the nitty-gritty? No problem, the product comparison data is constantly updated with new products and new features added to old products!

Wanna create comparison chart graphs just like I do for GPS, heart rate, power meters and more? No problem, here's the platform I use - you can too!

Think my written reviews are deep? You should check out my videos. I take things to a whole new level of interactive depth!

Smart Trainers Buyers Guide: Looking at a smart trainer this winter? I cover all the units to buy (and avoid) for indoor training. The good, the bad, and the ugly.

Check out my weekly podcast - with GPLAMA, which is packed with both gadget and non-gadget goodness!

Get all your awesome DC Rainmaker gear here!

I have built an extensive list of my most frequently asked questions. Below are the most popular.

View Them All Here →

You probably stumbled upon here looking for a review of a sports gadget.  If you’re trying to decide which unit to buy – check out my in-depth reviews section.  Some reviews are over 60 pages long when printed out, with hundreds of photos!  I aim to leave no stone unturned.

Here’s my most recent GPS watch guide here, and cycling GPS computers here. Plus there are smart trainers here, all in these guides cover almost every category of sports gadgets out there.  Looking for the equipment I use day-to-day?  I also just put together my complete ‘Gear I Use’ equipment list, from swim to bike to run and everything in between (plus a few extra things).  And to compliment that, here’s The Girl’s (my wife’s) list. Enjoy, and thanks for stopping by!

I travel a fair bit, both for work and for fun. Here’s a bunch of random trip reports and daily trip-logs that I’ve put together and posted. I’ve sorted it all by world geography, in an attempt to make it easy to figure out where I’ve been.

The most common question I receive outside of the “what’s the best GPS watch for me” variant, are photography-esq based. So in efforts to combat the amount of emails I need to sort through on a daily basis, I’ve complied this “My Photography Gear” post for your curious minds! It’s a nice break from the day to day sports-tech talk, and I hope you get something out of it!

Many readers stumble into my website in search of information on the latest and greatest sports tech products. But at the end of the day, you might just be wondering “What does Ray use when not testing new products?”. So here is the most up to date list of products I like and fit the bill for me and my training needs best! DC Rainmaker 2021 swim, bike, run, and general gear list. But wait, are you a female and feel like these things might not apply to you? If that’s the case (but certainly not saying my choices aren’t good for women), and you just want to see a different gear junkies “picks”, check out The Girl’s Gear Guide too.